- Three fingers and a thumb The Lite keeps the index, middle and ring fingers and the thumb of the full Shadow Hand, with the same staggered knuckles and equal finger lengths.
- 13 degrees of freedom over 16 joints Each finger has three driven degrees of freedom and a coupled fingertip joint, the thumb four, and every driven joint is controlled to ±1°.
- 2.4 kg with a 4 kg payload With its forearm the Lite weighs 2.4 kg against 4.3 kg for the five-finger hand, and it still holds up to 4 kg in a power grasp.
- Tactile thumb and index fingertips Two Shadow Tactile Fingertips with 17 three-axis taxels come fitted, and up to four of the digits can carry one.
- 13 Smart Motors, 5 kHz torque loops Each motor unit in the hand base integrates motor, gearbox, tendon force sensing and electronics, and can run at zero force so its joint is backdrivable.
- EtherCAT, ROS and a control PC The hand ships with an Ubuntu PC and ROS drivers on 100 Mbps EtherCAT, with Python and C++ access and a Gazebo simulation of the hand.
Description
The Shadow Dexterous Hand Lite (DHL) is the four-digit dexterous robotic hand of Shadow Robot Company's Dexterous Hand series: index, middle and ring fingers and a thumb, built to the shape and size of a typical adult male hand. It has 13 degrees of freedom over 16 joints, weighs 2.4 kg with its forearm and holds up to 4 kg in a power grasp. Like the full hand, it is self-contained, with all actuation and sensing inside the hand and forearm.
Shadow made the Lite for teams that want the Shadow Hand's finger kinematics on a lighter arm or a mobile manipulator. Each finger has three driven degrees of freedom over four joints, with the middle and distal joints coupled like a human finger, and the thumb has four. Thirteen Smart Motor units in the hand base drive the joints through tendons and close their own torque loops at 5 kHz, and every joint except the coupled fingertip joints is controlled to ±1°. That suits grasping research, in-hand manipulation, teleoperation and learning from demonstration.
Sensing follows the full hand: a Hall-effect sensor on every joint at about 0.2°, 26 tendon load sensors at about 30 mN, an IMU, and Shadow Tactile Fingertips with 17 three-axis taxels on the thumb and index finger, with room for four. Data reach the host at up to 1,000 Hz over 100 Mbps EtherCAT. The Lite ships with an Ubuntu control PC, ROS drivers, Python and C++ access and a Gazebo simulation, and runs from a 24 V supply.
Against the five-finger Shadow Dexterous Hand (DH), the Lite gives up the little finger, the fifth thumb joint and the wrist, and with them 1.9 kg. The Shadow Dexterous Hand Extra Lite (DHEL) and the Extra Super Lite (DHSL) reduce the hand further, to two fingers or one finger with the thumb. The right hand is standard and a mirrored left hand can be ordered for a bimanual setup; compare the rest of our dexterous robotic hands.
Key Capabilities
- Three fingers and a thumb: The Lite keeps the index, middle and ring fingers and the thumb of the full Shadow Hand, with the same staggered knuckles and equal finger lengths.
- 13 degrees of freedom over 16 joints: Each finger has three driven degrees of freedom and a coupled fingertip joint, the thumb four, and every driven joint is controlled to ±1°.
- 2.4 kg with a 4 kg payload: With its forearm the Lite weighs 2.4 kg against 4.3 kg for the five-finger hand, and it still holds up to 4 kg in a power grasp.
- Tactile thumb and index fingertips: Two Shadow Tactile Fingertips with 17 three-axis taxels come fitted, and up to four of the digits can carry one.
- 13 Smart Motors, 5 kHz torque loops: Each motor unit in the hand base integrates motor, gearbox, tendon force sensing and electronics, and can run at zero force so its joint is backdrivable.
- EtherCAT, ROS and a control PC: The hand ships with an Ubuntu PC and ROS drivers on 100 Mbps EtherCAT, with Python and C++ access and a Gazebo simulation of the hand.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Shadow Robot Company |
|---|---|
| Model | Shadow Dexterous Hand Lite (DHL) |
| Fingers | 4: index, middle and ring fingers and a thumb (no little finger) |
| Degrees of freedom | 13, across 16 joints |
| Thumb | 4 degrees of freedom, 4 joints |
| Each finger | 3 degrees of freedom, 4 joints; middle and distal joints coupled |
| Wrist joints | None |
| Finger joint ranges | J1 and J2 0–90°, J3 −15° to 90°, J4 (side to side) −20° to 20° |
| Thumb joint ranges | TH1 −15° to 90°, TH2 −40° to 40°, TH4 0–70°, TH5 −60° to 60° |
| Size | Shape and size of a typical adult male hand; equal-length fingers with staggered knuckles |
| Weight | 2.4 kg (hand and forearm) |
| Power-grasp payload | Up to 4 kg |
| Joint control accuracy | ±1° on every joint except the coupled distal finger joints |
| Speed | Full-range joint movement in free space at about 1 Hz (typical settings) |
| Actuation | 13 Shadow Smart Motor units with Maxon DC motors in the hand base, tendon-driven |
| Control loops | Torque loop at 5 kHz inside each motor unit; all other loops at 1 kHz on the host |
| Joint position sensing | Hall-effect sensor on every joint, about 0.2° resolution, 12-bit |
| Tendon force sensing | 26 tendon load sensors, about 30 mN resolution |
| IMU | 1 |
| Tactile sensing | Shadow Tactile Fingertips on the thumb and index finger as standard, up to 4; 17 three-axis Hall-effect taxels each |
| Sensor update rates | Position 1,000 Hz, tactile 1,000 Hz, force 500 Hz; temperature and current 100 Hz |
| Communication | EtherCAT, 100 Mbps |
| Software | ROS (control, visualisation, Gazebo simulation); Python and C++ access |
| Control PC | Multi-core laptop running Ubuntu with the drivers installed, supplied with the hand |
| Power | 24 V supply, supplied with the hand |
| Materials | Aluminium, brass, acetal, polycarbonate, polyurethane flesh |
| Hand side | Right as standard; a mirrored left hand can be ordered |
| What's in the box | Hand with forearm, control PC, power supplies, tactile fingertips, software and documentation |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Four digits: the index, middle and ring fingers and a thumb. It has 13 degrees of freedom over 16 joints, three in each finger with a coupled fingertip joint and four in the thumb.
Yes. Shadow Tactile Fingertips are fitted to the thumb and index finger as standard, each with 17 taxels that sense in three axes, and up to four digits can carry them. 26 tendon load sensors, joint position sensors and an IMU complete the sensing.
It weighs 2.4 kg including the forearm and holds up to 4 kg in a power grasp.
Over a 100 Mbps EtherCAT bus to the Ubuntu control PC supplied with the hand, with full ROS support, Python and C++ access and a Gazebo model. It runs from a 24 V supply, and mounting to your arm is confirmed with the quotation.
The full Shadow Dexterous Hand (DH) adds a little finger with a palm joint, a fifth thumb joint and a two-joint wrist, for 24 joints at 4.3 kg on 48 V. The Lite has 13 degrees of freedom at 2.4 kg on 24 V, which leaves more of a lighter arm's payload for the object.
Shadow Dexterous Hand Lite (DHL) Four-Finger Robotic Hand
- Regular price
- Request Quote for Price
Recently Viewed
You haven't viewed any products yet.
