- Two fingers and a thumb The Extra Lite keeps the thumb and two fingers of the Shadow Hand, each with the same four-joint layout as on the full hand.
- 10 degrees of freedom, 10 motors Ten DC motors drive 12 joints through tendons, one motor for each degree of freedom.
- 2.1 kg with a 3 kg payload It weighs 2.1 kg and holds up to 3 kg in a power grasp, which leaves more of a small arm's payload for the object.
- Tactile fingertip as standard One Shadow Tactile Fingertip with 17 three-axis taxels comes fitted, and each of the three digits can carry one.
- 20 tendon load sensors and an IMU Tendon forces and the hand's motion are measured on board for force-aware control and grasp data.
- 1 kHz EtherCAT with ROS Control runs at 1 kHz through the host over EtherCAT, inside Shadow's open-source ROS platform.
Description
The Shadow Dexterous Hand Extra Lite (DHEL) is a three-digit dexterous robotic hand from Shadow Robot Company, two fingers and a thumb, and a reduced configuration of the Shadow Dexterous Hand Lite. It has 10 degrees of freedom over 12 joints, driven by 10 DC motors through tendons, weighs 2.1 kg and holds up to 3 kg in a power grasp.
It is built for labs that want Shadow's finger design at a lower mass and with fewer channels to control: arms with a smaller payload, mobile manipulators and grasping experiments that three digits can handle. The thumb and both fingers keep the four-joint layout of the full hand, while ten motors instead of twenty give reinforcement and imitation learning a smaller action space to work in.
On board are 20 tendon load sensors, an IMU, Hall-effect joint sensing and one Shadow Tactile Fingertip with 17 three-axis taxels; up to three can be fitted, one per digit. Control runs at 1 kHz through the host over EtherCAT, and the hand works inside Shadow's open-source ROS platform like every hand in the series.
One size up, the Shadow Dexterous Hand Lite (DHL) adds a third finger for 13 degrees of freedom at 2.4 kg, and the five-finger Shadow Dexterous Hand (DH) has 24 joints with a wrist. The Shadow Dexterous Hand Extra Super Lite (DHSL) is smaller still, with one finger and a thumb. Compare them with the rest of our dexterous robotic hands.
Key Capabilities
- Two fingers and a thumb: The Extra Lite keeps the thumb and two fingers of the Shadow Hand, each with the same four-joint layout as on the full hand.
- 10 degrees of freedom, 10 motors: Ten DC motors drive 12 joints through tendons, one motor for each degree of freedom.
- 2.1 kg with a 3 kg payload: It weighs 2.1 kg and holds up to 3 kg in a power grasp, which leaves more of a small arm's payload for the object.
- Tactile fingertip as standard: One Shadow Tactile Fingertip with 17 three-axis taxels comes fitted, and each of the three digits can carry one.
- 20 tendon load sensors and an IMU: Tendon forces and the hand's motion are measured on board for force-aware control and grasp data.
- 1 kHz EtherCAT with ROS: Control runs at 1 kHz through the host over EtherCAT, inside Shadow's open-source ROS platform.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Shadow Robot Company |
|---|---|
| Model | Shadow Dexterous Hand Extra Lite (DHEL) |
| Series | Shadow Dexterous Hand Lite series |
| Fingers | 3 (two fingers and a thumb) |
| Degrees of freedom | 10, across 12 joints |
| Actuators | 10 DC motors, tendon-driven |
| Thumb | 4 joints |
| Each finger | 4 joints |
| Wrist joints | None |
| Weight | 2.1 kg overall |
| Power-grasp payload | Up to 3 kg |
| Tendon load sensors | 20 |
| IMU | 1 |
| Joint position sensing | Hall-effect sensor on every joint |
| Tactile sensing | 1 Shadow Tactile Fingertip as standard, up to 3; 17 three-axis Hall-effect taxels each |
| Control loop | 1 kHz through the host |
| Communication | EtherCAT, 100 Mbps |
| Software | ROS, open-source platform |
| Power supply | Confirm at quote |
| Hand side | Confirm at quote |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Two fingers and a thumb, with 10 degrees of freedom over 12 joints, each driven by its own DC motor through tendons.
Yes. One Shadow Tactile Fingertip with 17 three-axis taxels is fitted as standard, and the hand takes up to three, one on each digit. It also carries 20 tendon load sensors and an IMU.
It weighs 2.1 kg overall and holds up to 3 kg in a power grasp.
Over EtherCAT, with the control loop running at 1 kHz through the host and full ROS support. Mounting, hand side and power supply for your arm are confirmed with the quotation.
The Hand Lite (DHL) has three fingers and a thumb with 13 degrees of freedom, 2.4 kg and a 4 kg payload; the Extra Lite has one finger fewer and 10 degrees of freedom. The Extra Super Lite (DHSL) goes down to one finger and a thumb with 7 degrees of freedom.
Shadow Dexterous Hand Extra Lite (DHEL) Three-Finger Hand
- Regular price
- Request Quote for Price
Recently Viewed
You haven't viewed any products yet.
