- 12 active DoF, fully direct-drive Twelve gear-driven, force-controlled joint modules, with no passive joints, let the thumb oppose every finger down to the little finger.
- 270° tactile fingertips Each fingertip carries a 120-point array that senses 3D force, temperature, contact area, vibration and slip trend, with accuracy to 0.05 N.
- 80 N grip, 25 kg lift The whole hand grips with up to 80 N and, in Robotera's lab tests, lifts a 25 kg dumbbell; a single fingertip reaches 15 N.
- Backdrivable for learning A linear current-torque relationship and backdrivable joints suit reinforcement learning, imitation learning and current-loop force control.
- Up to 10 clicks per second Robotera rates its direct gear drive, with motors above 1 N·m of torque, faster than linkage- or tendon-driven designs.
- ROS 1, ROS 2 and URDF The SDK covers C++, Python, ROS 1 and ROS 2 on Ubuntu, and the URDF includes tactile simulation for Isaac Gym and MuJoCo.
- EtherCAT or RS-485 EtherCAT and RS-485 over USB run whole-hand control at 83 Hz on a 24–72 V supply.
Description
The Robotera XHAND1 Right is the right-hand version of Robotera's XHAND 1, a fully direct-drive dexterous robotic hand with 12 active degrees of freedom and no passive joints. Every joint has its own gear-driven, force-controlled joint module, three in the thumb, three in the index finger and two in each of the other fingers, so the thumb can oppose every finger down to the little finger and the index finger swings sideways from −5° to 17°.
Because all twelve joints are driven and backdrivable, with a linear relationship between motor current and torque, the hand suits reinforcement learning, imitation learning and force-control research: current-loop force control runs straight from the motors, and a finger gives way under an accidental knock instead of fighting it. Robotera supplies an SDK for C++, Python, ROS 1 and ROS 2 on Ubuntu, on x86 or ARM, and a URDF that includes tactile simulation for Isaac Gym and MuJoCo.
Each fingertip is wrapped 270° in a 120-point tactile array that senses 3D force (normal and both tangential directions), temperature, contact area, vibration and slip trend, with accuracy down to 0.05 N. The hand grips with up to 15 N at a fingertip and 80 N with the whole hand, and in Robotera's lab tests one finger holds more than 5 kg, four fingers more than 20 kg and the whole hand lifts a 25 kg dumbbell. It responds at up to 10 clicks per second, and Robotera rates its direct gear drive faster than linkage- or tendon-driven designs.
It weighs 1,100 g and measures 191 × 94 × 47 mm, the size of an adult hand. EtherCAT and RS-485 over USB carry whole-hand control at 83 Hz on a 24–72 V supply drawing up to 2.5 A at 48 V, and the hand mounts with eight M3 screws around the wrist with the harness leaving at the side. Robotera names xArm, Realman and UR among compatible arms; fitment to your arm or humanoid is confirmed with the quotation.
The Robotera XHAND1 left hand mirrors this one for two-handed teleoperation and bimanual research. The Robotera XHAND1 Lite is a different, lighter hand: 730 g, with 11 degrees of freedom, six of them driven. Compare all of our dexterous robotic hands.
Key Capabilities
- 12 active DoF, fully direct-drive: Twelve gear-driven, force-controlled joint modules, with no passive joints, let the thumb oppose every finger down to the little finger.
- 270° tactile fingertips: Each fingertip carries a 120-point array that senses 3D force, temperature, contact area, vibration and slip trend, with accuracy to 0.05 N.
- 80 N grip, 25 kg lift: The whole hand grips with up to 80 N and, in Robotera's lab tests, lifts a 25 kg dumbbell; a single fingertip reaches 15 N.
- Backdrivable for learning: A linear current-torque relationship and backdrivable joints suit reinforcement learning, imitation learning and current-loop force control.
- Up to 10 clicks per second: Robotera rates its direct gear drive, with motors above 1 N·m of torque, faster than linkage- or tendon-driven designs.
- ROS 1, ROS 2 and URDF: The SDK covers C++, Python, ROS 1 and ROS 2 on Ubuntu, and the URDF includes tactile simulation for Isaac Gym and MuJoCo.
- EtherCAT or RS-485: EtherCAT and RS-485 over USB run whole-hand control at 83 Hz on a 24–72 V supply.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | RobotEra |
|---|---|
| Model | XHAND1 (XHAND 1) |
| Hand side | Right |
| Fingers | 5 |
| Active degrees of freedom | 12 (no passive joints) |
| DoF allocation | Thumb 3, index finger 3, middle, ring and little finger 2 each |
| Actuation | Fully direct drive: 12 gear-driven, force-controlled joint modules (3 in the thumb, 9 in the four fingers) |
| Motor torque | > 1 N·m |
| Index finger side-sway | −5° to 17° |
| Thumb opposition | Reaches the little finger |
| Weight | 1,100 g |
| Dimensions (L × W × T) | 191 × 94 × 47 mm, measured flat |
| Fingertip shape | Rounded |
| Maximum grip force | 15 N at a fingertip, 80 N whole hand |
| Rated grip force | 12 N single finger, 24 N whole hand |
| Maximum load (Robotera lab tests) | > 5 kg single finger, > 20 kg four fingers, 25 kg whole hand |
| Rated load | 1.2 kg single finger, 4.8 kg whole hand |
| Minimum grip diameter | 16 mm |
| Fingertip repeatability | ±0.20 mm |
| Speed | Up to 10 clicks per second; open/close repetition > 2 Hz |
| Tactile sensors | 5 fingertip arrays, 120 points each, 270° coverage |
| Tactile sensing | 3D force (normal Z, tangential X and Y), temperature, contact area, vibration, slip trend; accuracy to 0.05 N |
| Control modes | Position (low or high damping), current-loop force control, force-position control |
| Control parameters | Joint position, torque, stiffness, damping |
| Joint feedback | Position, velocity, temperature, current (torque) |
| Whole-hand control frequency | 83 Hz |
| Communication interfaces | EtherCAT, RS-485 (USB) |
| Working voltage | 24–72 V |
| Current at 48 V | 0.15 A static (7 W), 2.5 A maximum (120 W) |
| Connector | DF62B-13EP-2.2C |
| Mounting | 8 × M3 screws around the wrist; harness exits at the side |
| SDK | C++, Python, ROS 1 and ROS 2 on Ubuntu; x86 and ARM |
| Simulation | URDF with tactile simulation; Isaac Gym and MuJoCo |
| Teleoperation | Vision Pro, Pico and Meta Quest headsets; Manus, motion-capture and exoskeleton gloves |
| Compatible arms (Robotera) | xArm, Realman, UR and others; fitment confirmed at quote |
| No-load grasp cycles | 1,000,000 |
| Working temperature | −20 to 60 °C |
Industries
Frequently Asked Questions
The Robotera XHAND1 Dexterous Hand Right is priced at €14.500 in your market.
Twelve, all active and none passive: three in the thumb, three in the index finger and two each in the middle, ring and little fingers. The index finger swings sideways from −5° to 17°.
Each of the five fingertips is wrapped 270° in a 120-point array that senses 3D force (normal and two tangential directions), temperature, contact area, vibration and slip trend, with accuracy to 0.05 N.
It grips with up to 80 N with the whole hand and 15 N at a fingertip, and in Robotera's lab tests lifts a 25 kg dumbbell. The rated values are 24 N and 12 N. The hand weighs 1,100 g.
Robotera's SDK supports C++, Python, ROS 1 and ROS 2 on Ubuntu, on x86 and ARM, over EtherCAT or RS-485. Robotera names xArm, Realman and UR among compatible arms; fitment to your robot is confirmed with the quotation.
Yes, this is the right hand. The XHAND1 left hand has the same specification, so one of each makes a matched pair for bimanual work or two-handed teleoperation.
Recently Viewed
You haven't viewed any products yet.
