- Left hand of a matched pair With the XHAND1 right hand it gives a two-armed robot the same 12-DoF hand on both sides.
- Built for teleoperation Robotera's retargeting software maps a human hand onto the XHAND from Vision Pro, Pico or Meta Quest headsets and Manus or exoskeleton gloves.
- Every joint driven Twelve gear-driven, force-controlled joint modules with motors above 1 N·m, three each in the thumb and index finger and two in each other finger.
- 120-point tactile arrays A 270° array on each fingertip reads 3D force, temperature, contact area, vibration and slip trend.
- Up to 80 N grip The whole hand grips with up to 80 N, a fingertip with 15 N, and the hand lifts a 25 kg dumbbell in Robotera's lab tests.
- SDK for ROS 1 and ROS 2 C++ and Python on Ubuntu, on x86 or ARM, plus a URDF with tactile simulation for Isaac Gym and MuJoCo.
Description
The Robotera XHAND1 Left is the left hand of Robotera's XHAND 1 dexterous robotic hand, and with the right hand it forms the pair that two-armed setups need: teleoperated data collection, bimanual manipulation research and humanoid upper bodies. Like the right hand, it has 12 active degrees of freedom, every one driven and none passive.
Robotera built the XHAND 1 for teleoperation and learning. Its own retargeting software maps a human hand onto the XHAND from Vision Pro, Pico or Meta Quest headsets, Manus and other motion-capture gloves, or exoskeleton gloves, so operators can record demonstrations for imitation learning. The SDK covers C++, Python, ROS 1 and ROS 2 on Ubuntu, on x86 or ARM, and the URDF includes tactile simulation for Isaac Gym and MuJoCo.
The thumb and index finger have three joints each and the other three fingers two, each a gear-driven, force-controlled module with motor torque above 1 N·m. The index finger swings sideways from −5° to 17°, the thumb reaches the little finger in opposition, and the hand opens and closes more than twice a second with fingertips repeating to ±0.20 mm. The joints are backdrivable, which keeps the hand safe under impact and lets an operator move it by hand for kinesthetic teaching.
Five 270° fingertip arrays, 120 points each, report normal and tangential force, temperature, contact area, vibration and slip trend. Maximum grip is 80 N for the whole hand and 15 N at a fingertip, with rated values of 24 N and 12 N, and in Robotera's lab tests the whole hand lifts a 25 kg dumbbell. At 1,100 g and 191 × 94 × 47 mm it runs on 24–72 V, connects over EtherCAT or RS-485 via USB with 83 Hz whole-hand control, and is rated for one million no-load grasp cycles from −20 to 60 °C.
Order it with the Robotera XHAND1 right hand for a matched pair. The Robotera XHAND1 Lite is Robotera's slimmer 730 g hand with 11 degrees of freedom. Compare the rest of our dexterous robotic hands.
Key Capabilities
- Left hand of a matched pair: With the XHAND1 right hand it gives a two-armed robot the same 12-DoF hand on both sides.
- Built for teleoperation: Robotera's retargeting software maps a human hand onto the XHAND from Vision Pro, Pico or Meta Quest headsets and Manus or exoskeleton gloves.
- Every joint driven: Twelve gear-driven, force-controlled joint modules with motors above 1 N·m, three each in the thumb and index finger and two in each other finger.
- 120-point tactile arrays: A 270° array on each fingertip reads 3D force, temperature, contact area, vibration and slip trend.
- Up to 80 N grip: The whole hand grips with up to 80 N, a fingertip with 15 N, and the hand lifts a 25 kg dumbbell in Robotera's lab tests.
- SDK for ROS 1 and ROS 2: C++ and Python on Ubuntu, on x86 or ARM, plus a URDF with tactile simulation for Isaac Gym and MuJoCo.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | RobotEra |
|---|---|
| Model | XHAND1 (XHAND 1) |
| Hand side | Left |
| Fingers | 5 |
| Active degrees of freedom | 12 (no passive joints) |
| DoF allocation | Thumb 3, index finger 3, middle, ring and little finger 2 each |
| Actuation | Fully direct drive: 12 gear-driven, force-controlled joint modules (3 in the thumb, 9 in the four fingers) |
| Motor torque | > 1 N·m |
| Index finger side-sway | −5° to 17° |
| Thumb opposition | Reaches the little finger |
| Weight | 1,100 g |
| Dimensions (L × W × T) | 191 × 94 × 47 mm, measured flat |
| Fingertip shape | Rounded |
| Maximum grip force | 15 N at a fingertip, 80 N whole hand |
| Rated grip force | 12 N single finger, 24 N whole hand |
| Maximum load (Robotera lab tests) | > 5 kg single finger, > 20 kg four fingers, 25 kg whole hand |
| Rated load | 1.2 kg single finger, 4.8 kg whole hand |
| Minimum grip diameter | 16 mm |
| Fingertip repeatability | ±0.20 mm |
| Speed | Up to 10 clicks per second; open/close repetition > 2 Hz |
| Tactile sensors | 5 fingertip arrays, 120 points each, 270° coverage |
| Tactile sensing | 3D force (normal Z, tangential X and Y), temperature, contact area, vibration, slip trend; accuracy to 0.05 N |
| Control modes | Position (low or high damping), current-loop force control, force-position control |
| Control parameters | Joint position, torque, stiffness, damping |
| Joint feedback | Position, velocity, temperature, current (torque) |
| Whole-hand control frequency | 83 Hz |
| Communication interfaces | EtherCAT, RS-485 (USB) |
| Working voltage | 24–72 V |
| Current at 48 V | 0.15 A static (7 W), 2.5 A maximum (120 W) |
| Connector | DF62B-13EP-2.2C |
| Mounting | 8 × M3 screws around the wrist; harness exits at the side |
| SDK | C++, Python, ROS 1 and ROS 2 on Ubuntu; x86 and ARM |
| Simulation | URDF with tactile simulation; Isaac Gym and MuJoCo |
| Teleoperation | Vision Pro, Pico and Meta Quest headsets; Manus, motion-capture and exoskeleton gloves |
| Compatible arms (Robotera) | xArm, Realman, UR and others; fitment confirmed at quote |
| No-load grasp cycles | 1,000,000 |
| Working temperature | −20 to 60 °C |
Industries
Frequently Asked Questions
The Robotera XHAND1 Dexterous Hand Left is priced at €14.500 in your market.
Yes, this is the left hand. The XHAND1 right hand has the same specification, and the two together make a matched pair for bimanual research or two-handed teleoperation.
Twelve, all active: three in the thumb, three in the index finger and two each in the middle, ring and little fingers, each driven by its own gear-driven joint module.
Yes. Robotera's retargeting software maps a human hand onto the XHAND from Vision Pro, Pico or Meta Quest headsets, Manus and other motion-capture gloves, or exoskeleton gloves.
A 270° array of 120 points wraps each of the five fingertips and senses 3D force, temperature, contact area, vibration and slip trend, with accuracy to 0.05 N.
It connects over EtherCAT or RS-485 via USB with 83 Hz whole-hand control on 24–72 V, and weighs 1,100 g. Fitment to your arm or humanoid is confirmed with the quotation.
Recently Viewed
You haven't viewed any products yet.
