- 94 pressure sensors Arrays in the palm, on every finger pad and fingertip and at four finger roots sense from 10 g to 2,500 g and take 20 kg without damage.
- 20 degrees of freedom, 16 active The thumb has four driven joints and each finger three, with ±22° of lateral swing across the four fingers.
- Backdrivable joints, replaceable fingers Every finger joint can be back-driven, which keeps reinforcement-learning training smooth, and each of the five fingers can be swapped on its own.
- Up to 4.5 kg grasp load Holding a 5 cm round object it carries 3.5 kg palm down and 4.5 kg palm facing left, with 10 N at each fingertip.
- 1,000 Hz over USB 2.0 Joint, pressure, temperature and IMU data stream at 1,000 Hz, and each joint takes position, velocity, torque, stiffness and damping commands.
- Built for the H1 and H1-2 This left hand is the Dex5-1P build for Unitree's H1 and H1-2 humanoids and runs on 24–60 V.
Description
The Unitree Dex5-1P is Unitree's five-finger tactile dexterous robotic hand, and this is the left hand built for the H1 and H1-2 humanoids (part DEX5-HANDL). Unitree offers the Dex5-1 as an optional hand for the H1-2; the P marks the build with 94 pressure sensors in the palm, finger pads, fingertips and finger roots. It is meant for H1 and H1-2 owners doing manipulation research or reinforcement and imitation learning, and Unitree opens the hand to secondary development for teams writing their own tactile algorithms.
The hand has 20 degrees of freedom, 16 of them active: four in the thumb and three in each finger, with ±22° of lateral swing across the four fingers. Twelve joints use Unitree's micro force-controlled composite transmission, which gives the hand tactile proprioception, and four use force-controlled gear transmissions, driven by hollow-cup motors with high-precision encoders. Every finger joint is backdrivable, which Unitree designed to end the "stiff hand" problem in reinforcement-learning training, and each of the five fingers can be replaced on its own.
Fingertip strength is 10 N, fingertip repeatability ±1 mm, and the fingers close on objects down to 10 mm across. Holding a 5 cm round hard object, the hand carries up to 3.5 kg palm down and 4.5 kg with the palm facing left. Its pressure arrays (2 × 5 in the palm, 2 × 3 on each finger pad, fingertip and four finger roots) sense from 10 g to 2,500 g and take 20 kg without damage. Pressure and sensor temperature arrive in the same 1,000 Hz USB 2.0 stream as joint position, velocity, torque, temperature, voltage, current and IMU data. It weighs 1,100 g, measures 217.3 × 127.5 × 72.1 mm laid flat and runs on 24–60 V.
Within the Dex5 family, the Unitree Dex5-1 is the same hand without the pressure sensors, and the Dex5-1P for the Unitree H2 is listed separately. The Unitree Dex5-S is a different design: 22 degrees of freedom, all motor-driven, at 620 g and 1:1 human-hand scale. For a two-handed H1 or H1-2, ask us for the matching right hand, or compare the rest of our dexterous robotic hands.
Key Capabilities
- 94 pressure sensors: Arrays in the palm, on every finger pad and fingertip and at four finger roots sense from 10 g to 2,500 g and take 20 kg without damage.
- 20 degrees of freedom, 16 active: The thumb has four driven joints and each finger three, with ±22° of lateral swing across the four fingers.
- Backdrivable joints, replaceable fingers: Every finger joint can be back-driven, which keeps reinforcement-learning training smooth, and each of the five fingers can be swapped on its own.
- Up to 4.5 kg grasp load: Holding a 5 cm round object it carries 3.5 kg palm down and 4.5 kg palm facing left, with 10 N at each fingertip.
- 1,000 Hz over USB 2.0: Joint, pressure, temperature and IMU data stream at 1,000 Hz, and each joint takes position, velocity, torque, stiffness and damping commands.
- Built for the H1 and H1-2: This left hand is the Dex5-1P build for Unitree's H1 and H1-2 humanoids and runs on 24–60 V.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | Dex5-1P (tactile) |
| Part number | DEX5-HANDL |
| Hand side | Left |
| Compatible robots | Unitree H1 and H1-2 |
| Fingers | 5, each replaceable on its own |
| Degrees of freedom | 20 (16 active, 4 passive) |
| Active joints | Thumb 4; index, middle, ring and little finger 3 each |
| Transmission | 12 micro force-controlled composite transmission joints, 4 micro force-controlled gear-transmission joints |
| Motors | Hollow-cup motors with high-precision encoders |
| Thumb joint ranges | Joint 0: −33.5° to 39°; joint 1: 0–100°; joint 2: 0–110°; joint 3: 0–92° |
| Finger joint ranges | Knuckle 0: −22° to 22°; knuckle 1: 0–90°; knuckle 2: 0–95°; knuckle 3: 0–81° (coupled with joint 2) |
| Four-finger lateral swing | ±22° |
| Weight | 1,100 g |
| Size (flat) | 217.3 × 127.5 × 72.1 mm |
| Fingertip strength | 10 N |
| Fingertip repeat positioning accuracy | ±1 mm |
| Minimum grip diameter | 10 mm |
| Grasp load, palm down | Up to 3.5 kg (5 cm round hard object, room temperature) |
| Grasp load, palm facing left | Up to 4.5 kg (5 cm round hard object, room temperature) |
| Pressure sensors | 94 in total |
| Sensor array layout | Palm 2 × 5; each finger pad 2 × 3 (× 5); each fingertip 2 × 3 (× 5); each finger root 2 × 3 (× 4) |
| Pressure perception range | 10 g – 2,500 g |
| Maximum load without damage | 20 kg |
| Communication interface | USB 2.0 |
| Communication rate | 1,000 Hz |
| Feedback | Joint mode, position, velocity, torque and temperature; voltage and current; sensor pressure and temperature; IMU data |
| Control commands | Joint mode, position, velocity, torque, stiffness and damping |
| Working voltage | 24–60 V |
| Current (at 58 V) | 0.2 A static, 4 A maximum |
| Working temperature | −20 to 60 °C |
| Software | Open for secondary development, including tactile algorithms |
Industries
Frequently Asked Questions
The Unitree Dex5-1P Tactile Dexterous Hand Left for H1/H1-2 is priced at €26.550 in your market.
Twenty, 16 of them active and 4 passive. The thumb has four driven joints and each other finger three, and the four fingers swing ±22° sideways.
94 pressure sensors: a 2 × 5 array in the palm and 2 × 3 arrays on each finger pad, each fingertip and four finger roots. They sense from 10 g to 2,500 g, take 20 kg without damage and report pressure and sensor temperature with the joint data.
It weighs 1,100 g. Holding a 5 cm round hard object it carries up to 3.5 kg palm down and 4.5 kg palm facing left, and each fingertip pushes with 10 N.
This left hand is the Dex5-1P build for Unitree's H1 and H1-2 humanoids. It connects over USB 2.0 at 1,000 Hz on 24–60 V. For a two-handed robot, ask us for the matching right hand with your order.
The Dex5-1 is the same hand without the pressure sensors. The Dex5-S is a different design: 22 degrees of freedom, all motor-driven, at 1:1 human-hand scale and 620 g, with tactile sensing only on the Dex5-S Pro.
Unitree Dex5-1P Tactile Dexterous Hand Left for H1/H1-2
- Regular price
- €26.550,00
- Sale price
Recently Viewed
You haven't viewed any products yet.
