- 30 N thumb, 28 N fingertips The thumb tip pushes with 30 N and each fingertip with 28 N, and Inspire rates the overall load capacity at the equivalent of 15 kg.
- Holds its grip with power off A power-off self-lock keeps every finger in place when the supply is cut.
- Force sensing at 0.05 N Six force sensors, one per actuator, read finger force at 0.05 N resolution for threshold-based or closed-loop gripping.
- Tactile builds with 17 or 5 sensors The T1 build carries 17 piezoresistive sensors over fingertips, finger pads and palm (0–30 N); the T2 build carries five capacitive sensors (0–20 N).
- Modbus TCP plus CAN or RS-485 Every RH56E2 connects over Modbus TCP on Ethernet, plus CAN 2.0 or RS-485 depending on the model.
- Quick, repeatable fingers The four fingers flex at over 200°/s, the hand closes in 0.8 s, and fingertips repeat to ±0.20 mm.
Description
The Inspire RH56E2 is the heavy-load dexterous robotic hand from Inspire Robots' RH56 series: five fingers and six actuators built to grip with the force of a human hand. Inspire describes it as the first industrial-grade dexterous hand with human-hand grasping force, with 30 N at the thumb tip, 28 N at each fingertip and an overall load capacity equivalent to 15 kg.
That strength is the reason to choose it over lighter hands: power tools, door handles, kettlebells, boxes and workpieces in industrial automation, service robots and teaching labs. A power-off self-lock holds the fingers in place when power is cut.
Six micro linear servo actuators move 12 joints, each with a force sensor that reads finger force at 0.05 N resolution, and fingertips repeat to ±0.20 mm. The thumb rotates laterally through 75–170° at more than 130°/s and flexes at more than 130°/s, the four fingers flex at more than 200°/s, and the hand closes in 0.8 s. It measures 211.5 mm long, 93.0 mm across the palm and 47.5 mm thick, and runs on 24 V ±10 % with a 4 A peak.
The RH56E2 comes as a left or a right hand, each with Modbus TCP over Ethernet plus either CAN 2.0 (the -0 models) or RS-485 (the -2 models). Without tactile sensors it weighs 770 ± 10 g. The T1 tactile build adds 17 piezoresistive sensors across the fingertips, finger pads and palm with a 0–30 N range; the T2 build carries five capacitive sensors with a 0–20 N range; both are accurate to 5 % of full scale and weigh 790 ± 10 g. Hand side, bus and tactile option are confirmed with the quotation.
For lighter work, the Inspire RH56DFX weighs 540 g with 15 N at the thumb tip, and the Inspire RH56F1 brings EtherCAT at 620 g. Compare them with the rest of our dexterous robotic hands.
Key Capabilities
- 30 N thumb, 28 N fingertips: The thumb tip pushes with 30 N and each fingertip with 28 N, and Inspire rates the overall load capacity at the equivalent of 15 kg.
- Holds its grip with power off: A power-off self-lock keeps every finger in place when the supply is cut.
- Force sensing at 0.05 N: Six force sensors, one per actuator, read finger force at 0.05 N resolution for threshold-based or closed-loop gripping.
- Tactile builds with 17 or 5 sensors: The T1 build carries 17 piezoresistive sensors over fingertips, finger pads and palm (0–30 N); the T2 build carries five capacitive sensors (0–20 N).
- Modbus TCP plus CAN or RS-485: Every RH56E2 connects over Modbus TCP on Ethernet, plus CAN 2.0 or RS-485 depending on the model.
- Quick, repeatable fingers: The four fingers flex at over 200°/s, the hand closes in 0.8 s, and fingertips repeat to ±0.20 mm.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | Inspire Robots |
|---|---|
| Model | RH56E2 |
| Hand side | Left (RH56E2-0L / -2L) or right (RH56E2-0R / -2R), confirmed with the quotation |
| Fingers | 5 |
| Degrees of freedom | 6 |
| Joints | 12 |
| Actuators | 6 micro linear servo actuators, each with a force sensor |
| Weight | 770 ± 10 g without tactile sensors; 790 ± 10 g with tactile sensors |
| Size | 211.5 mm long, 93.0 mm palm width, 47.5 mm thick |
| Thumb fingertip strength | 30 N |
| Fingertip strength | 28 N |
| Overall load capacity | Equivalent to 15 kg |
| Force resolution | 0.05 N |
| Repeatability | ±0.20 mm |
| Thumb lateral rotation range | 75–170° |
| Thumb lateral rotation speed | > 130°/s |
| Thumb flexion speed | > 130°/s |
| Four-finger flexion speed | > 200°/s |
| Hand closing time | 0.8 s |
| Power-off self-lock | Yes |
| Finger control modes | Speed-force protection, force closed-loop control |
| Tactile option T1 | 17 piezoresistive sensors (fingertips, finger pads, palm), 0–30 N, ≤ 5 % FS |
| Tactile option T2 | 5 capacitive sensors, 0–20 N, ≤ 5 % FS |
| Control interfaces | Modbus TCP (Ethernet) + CAN 2.0 (-0 models) or Modbus TCP + RS-485 (-2 models) |
| Operating voltage | 24 V ±10 % |
| Quiescent current at 24 V | 0.2 A without tactile sensors, 0.25 A with tactile sensors |
| Peak current | 4 A at 24 V |
| Wrist connector | 8-pin aviation plug, compatible with LEMO FGG-1B-8P |
| Wrist mounting | 4 × Ø3.5 mm through holes |
| SDK and ROS support | Confirm at quote |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
The Inspire RH56E2 Heavy-Load Dexterous Hand is priced at €6.875 in your market.
The thumb tip pushes with 30 N and each fingertip with 28 N, and Inspire rates the overall load capacity at the equivalent of 15 kg. The hand weighs 770 g without tactile sensors and 790 g with them.
Six, moving 12 joints. Each of the four fingers has one actuator, and the thumb has two: one to bend it and one to rotate it laterally through 75–170°.
It comes with or without them. The T1 build has 17 piezoresistive sensors over the fingertips, finger pads and palm with a 0–30 N range, and the T2 build five capacitive sensors with a 0–20 N range; builds without tactile sensors grip by the six actuator force sensors at 0.05 N resolution.
Modbus TCP over Ethernet on every model, plus CAN 2.0 on the -0 models or RS-485 on the -2 models, with an open register protocol and a 24 V supply. Fitment to your arm or humanoid is confirmed with the quotation.
Both exist: the -0L and -2L models are left hands, the -0R and -2R models right hands. Hand side, bus and tactile option are confirmed with the quotation, and one of each makes a pair for a two-armed robot.
Recently Viewed
You haven't viewed any products yet.
