- 30 kg whole-hand payload Each finger holds up to 8 kg and the whole hand up to 30 kg, with a 50 N five-finger grip.
- 10 degrees of freedom from six motors Six precision micro-motors drive thumb flexion and abduction and the flexion of each finger, and each finger adds a passive joint.
- Three builds The Basic runs RS-485 and CAN on 9.5–28 V, the Touch adds fingertip tactile sensors, and the Advanced runs RS-485, CAN FD and EtherCAT on 12–78 V.
- Fingertip sensing on the Touch Its sensors measure normal pressure, shear force, force direction and proximity up to 1 cm, from 0.1 N to a configurable 25 N, at 50 Hz or more.
- Rated for 300,000 finger cycles BrainCo rates finger life at 300,000 open-close cycles, on a frame of aviation aluminium alloy and food-grade plastic.
- SDK, ROS and MuJoCo models BrainCo's Python and C/C++ SDK, a desktop tool for Windows and Ubuntu, a ROS URDF model and a MuJoCo model support development and simulation.
Description
The BrainCo Revo 1 is BrainCo's first-generation bionic dexterous robotic hand, a five-finger hand for the left or right side that grew out of the company's prosthetic hand work. Six precision micro-motors give it 10 degrees of freedom, and it weighs 545 g, measuring 183 mm from palm base to middle fingertip and 86 mm across the palm.
Its strength is load: 50 N across five fingers, up to 8 kg on a single finger and 30 kg for the whole hand, with the thumb and index finger opening 113 mm apart and a control precision of 0.1 mm. Three grip-force levels, position and speed control and a turbo mode that re-grips after a stall help it hold soft or shifting objects, and BrainCo rates the fingers for 300,000 open-close cycles. That makes it a sturdy hand for research labs, teaching robots and human-machine interface projects that value payload over the lowest mass.
BrainCo builds the Revo 1 in three versions. The Basic connects over RS-485 with the open Modbus-RTU protocol or over CAN, on 9.5–28 V, with a 30 N single-finger pinch. The Touch adds a sensor in each fingertip that measures normal pressure, shear force, force direction and proximity up to 1 cm, from 0.1 N to a configurable 25 N with 5 % full-scale accuracy. The Advanced runs RS-485, CAN FD and EtherCAT on 12–78 V. The version, hand side and interface are confirmed with the quotation.
The newer Revo 2 Basic and Revo 2 Touch put 11 degrees of freedom into 383 g and carry 20 kg; the Revo 1 is heavier and carries more. BrainCo's Python and C/C++ SDK, a desktop tool for Windows and Ubuntu, a ROS URDF model and a MuJoCo model support integration and simulation. Compare both generations with our other dexterous robotic hands.
Key Capabilities
- 30 kg whole-hand payload: Each finger holds up to 8 kg and the whole hand up to 30 kg, with a 50 N five-finger grip.
- 10 degrees of freedom from six motors: Six precision micro-motors drive thumb flexion and abduction and the flexion of each finger, and each finger adds a passive joint.
- Three builds: The Basic runs RS-485 and CAN on 9.5–28 V, the Touch adds fingertip tactile sensors, and the Advanced runs RS-485, CAN FD and EtherCAT on 12–78 V.
- Fingertip sensing on the Touch: Its sensors measure normal pressure, shear force, force direction and proximity up to 1 cm, from 0.1 N to a configurable 25 N, at 50 Hz or more.
- Rated for 300,000 finger cycles: BrainCo rates finger life at 300,000 open-close cycles, on a frame of aviation aluminium alloy and food-grade plastic.
- SDK, ROS and MuJoCo models: BrainCo's Python and C/C++ SDK, a desktop tool for Windows and Ubuntu, a ROS URDF model and a MuJoCo model support development and simulation.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | BrainCo |
|---|---|
| Model | Revo 1 |
| Versions | Basic (MRL1/MRR1), Touch (MTL1/MTR1), Advanced (MEL2/MER2) |
| Hand side | Left or right, confirmed with the quotation |
| Fingers | 5 |
| Degrees of freedom | 10 (6 active, 4 passive) |
| Actuators | 6 precision micro-motors |
| Range of motion | Thumb flexion 0–55°, thumb abduction/adduction 0–90°, each finger 0–70° |
| Weight | 545 g |
| Hand length (palm base to middle fingertip) | 183 mm |
| Maximum palm width | 86 mm |
| Thumb length (tip to palm base) | 100 mm |
| Wrist | 48 mm diameter, 24 mm high |
| Maximum opening (index finger to thumb) | 113 mm |
| Five-finger grip force | 50 N |
| Single-finger pinch force | 30 N (Basic and Touch), 20 N (Advanced) |
| Single-finger payload | 8 kg |
| Whole-hand payload | 30 kg |
| Control precision | 0.1 mm |
| Finger open/close time | 0.85 s (Basic and Touch), 0.95 s (Advanced) |
| Finger service life | 300,000 open-close cycles |
| Sensors | Position and current sensors |
| Tactile sensing (Touch) | Fingertip sensors for normal pressure, shear force, force direction and proximity |
| Tactile range (Touch) | 0–25 N (configurable), 0.1 N minimum force, 5 % FS accuracy, overload threshold ≥ 50 N |
| Proximity range (Touch) | 0–1 cm |
| Tactile communication rate (Touch) | ≥ 50 Hz |
| Communication interfaces | RS-485 (Modbus-RTU) and CAN on Basic and Touch; RS-485, CAN FD and EtherCAT on Advanced |
| Supply voltage | 9.5–28 V (Basic and Touch), 12–78 V (Advanced) |
| Maximum current | 3 A (Basic and Touch), 5 A at 24 V (Advanced) |
| Control | Position and speed control, three grip-force levels, turbo re-grip mode |
| Protection | Stall protection, shake and drop protection |
| Default device ID | 1, adjustable 1–254 |
| SDK and tools | Python and C/C++ SDK; desktop tool for Windows and Ubuntu |
| Simulation models | ROS URDF and MuJoCo |
| Materials | Aviation aluminium alloy and food-grade plastic |
| Operating temperature | −10 to 40 °C |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — the version, hand side, quantity and delivery are confirmed per project.
Ten, from six motors. The thumb has driven flexion (0–55°) and abduction/adduction (0–90°); each of the other four fingers has one driven flexion joint (0–70°) and one passive joint.
The Basic uses RS-485 and CAN on 9.5–28 V. The Touch is the Basic with fingertip tactile sensors. The Advanced adds CAN FD and EtherCAT, runs on 12–78 V and pinches with 20 N per finger instead of 30 N.
Up to 30 kg in the whole hand and 8 kg on a single finger, with a 50 N five-finger grip. The hand weighs 545 g.
The Revo 2 is the lighter successor: 383 g with 11 degrees of freedom and a 20 kg payload, against 545 g, 10 degrees of freedom and 30 kg for the Revo 1.
RS-485 with Modbus-RTU and CAN on the Basic and Touch, RS-485, CAN FD and EtherCAT on the Advanced, all with BrainCo's Python and C/C++ SDK. BrainCo makes left and right hands; the side is confirmed with the quotation.
Recently Viewed
You haven't viewed any products yet.
