- Contact data on both sides of the hand Force-sensing arrays on the palm and the back of the hand, as well as all five fingers, report where and how hard the hand is touched.
- 0.1 N resolution, 0–20 N More than 300 taxels in seven regions read one-axis force in 0.1 N steps and withstand 200 N without damage.
- Left hand of a sensing pair Mirrored joints match the OmniHand 2025 Tactile right hand for bimanual robots.
- 10 driven joints, 6 passive The hand has 16 degrees of freedom in 180 mm and up to 550 g, with 0.3 mm fingertip repeatability.
- Tactile and hybrid control A tactile mode joins position, torque, hybrid position-torque and velocity control, with tactile pressure in the feedback.
- Simulation and ROS 2 Left- and right-hand URDF and MuJoCo models plus C++, Python and ROS 2 interfaces come with AgiBot's SDK.
Description
This is the left hand of the AgiBot OmniHand 2025 Tactile, the version of AgiBot's compact dexterous robotic hand that feels what it touches. Mounted on the left wrist of a humanoid or robot arm, and paired with the matching right hand, it gives a two-handed robot touch sensing on both sides: force-sensing arrays on the fingers, palm and back of the hand, 16 degrees of freedom and no more than 550 g per hand.
Where the standard OmniHand 2025 knows only its joint positions and torques, this hand also reports where and how hard it is touched. More than 300 taxels in seven regions read one-axis force across 0–20 N at 0.1 N resolution and withstand 200 N, and the data arrives with the joint feedback over CAN FD or RS-485 at 1 kHz. That suits bimanual grasping studies, teleoperation, learning data that includes contact, and robots that respond to a touch on the back of the hand.
Ten of its 16 joints are driven: three in the thumb, two in each of the index, ring and little fingers and one in the middle finger, with six passive joints following. Fingertips push with up to 5 N and repeat to 0.3 mm, the five-finger grip reaches at least 5 kg in hybrid force control, and the hand opens or closes in 0.5 s. It runs on 24 V, measures 180 × 85 × 38.5 mm, mounts with four M4 screws and comes with power, CAN FD, RS-485 and USB Type-C cables. AgiBot's C++, Python and ROS 2 SDK and its URDF and MuJoCo models support development and simulation.
Order it with the OmniHand 2025 Tactile right hand for a sensing pair. Without the arrays, the standard OmniHand 2025 left hand covers gesture and light handling, and the OmniHand 3 Lite is AgiBot's 350 g hand for smaller robots. See every option in our dexterous robotic hands.
Key Capabilities
- Contact data on both sides of the hand: Force-sensing arrays on the palm and the back of the hand, as well as all five fingers, report where and how hard the hand is touched.
- 0.1 N resolution, 0–20 N: More than 300 taxels in seven regions read one-axis force in 0.1 N steps and withstand 200 N without damage.
- Left hand of a sensing pair: Mirrored joints match the OmniHand 2025 Tactile right hand for bimanual robots.
- 10 driven joints, 6 passive: The hand has 16 degrees of freedom in 180 mm and up to 550 g, with 0.3 mm fingertip repeatability.
- Tactile and hybrid control: A tactile mode joins position, torque, hybrid position-torque and velocity control, with tactile pressure in the feedback.
- Simulation and ROS 2: Left- and right-hand URDF and MuJoCo models plus C++, Python and ROS 2 interfaces come with AgiBot's SDK.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | AgiBot |
|---|---|
| Model | OmniHand 2025 (O10), tactile build |
| Hand side | Left |
| Fingers | 5 |
| Degrees of freedom | 16 (10 active, 6 passive) |
| Active joints | Thumb 3, index finger 2, middle finger 1, ring finger 2, little finger 2 |
| Transmission | Linkage, motor and gear drive |
| Material | PA and silicone with a soft-touch coating; pinch-prevention design |
| Weight | Up to 550 g |
| Size | 180 × 85 × 38.5 mm |
| Opening / closing time | 0.5 s / 0.5 s minimum |
| Fingertip repeat positioning accuracy | 0.3 mm |
| Maximum fingertip force | 5 N (typical) |
| Five-finger grip force | ≥ 5 kg (hybrid force control mode) |
| Load, palm up | 1 kg typical, 2 kg maximum (5 cm rigid object) |
| Minimum grasp diameter | 5 mm |
| Tactile sensing | One-axis force sensing in seven regions: thumb, index, middle, ring and little finger, palm and back of the hand |
| Force-sensing taxels | More than 300 |
| Tactile resolution | 0.1 N |
| Tactile range | 0–20 N |
| Maximum non-destructive force | 200 N |
| Communication interfaces | CAN FD (1 Mbit/s arbitration, 5 Mbit/s data), RS-485, USB Type-C to a host computer |
| Communication rate | 1 kHz |
| Feedback | Joint position, angle, torque, speed and temperature; voltage and current; tactile pressure |
| Control modes | Position, torque, hybrid position-torque and velocity, plus tactile mode |
| Operating voltage | 24 V nominal (18–27 V) |
| Current | 0.2 A idle, 3.5 A maximum |
| Operating temperature | 0–45 °C |
| Firmware updates | Over the air (OTA) |
| SDK | C++ and Python APIs with a kinematics library; ROS 2 interface on Linux; Windows host software |
| Simulation models | Left- and right-hand URDF and MuJoCo models (ROS 2 Humble) |
| Wrist mounting | Four M4 screws at the wrist |
| Power connector | XT30 |
| What's in the box | OmniHand 2025, power and CAN FD cable (XT30), RS-485 cable, USB Type-C cable, quick start guide, product certificate |
| Robot mounting | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Yes. This is the left hand of the OmniHand 2025 Tactile; the right hand has the same specification with mirrored joints, and ordering both gives a two-handed robot touch sensing on each side.
On the thumb, the four fingers, the palm and the back of the hand: seven regions with more than 300 taxels. They read one-axis force from 0 to 20 N at 0.1 N resolution.
No more than 550 g. Fingertips push with up to 5 N, and the five-finger grip reaches at least 5 kg in hybrid force control mode.
CAN FD and RS-485 at 1 kHz plus USB Type-C to a host computer, on 24 V. AgiBot's SDK has C++ and Python APIs and a ROS 2 interface, and URDF and MuJoCo models are available for both hands.
Choose the Tactile when the robot must sense contact or respond to touch; it adds the arrays and a tactile control mode for a little extra weight. The standard build has the same joints and interfaces for gesture and light handling.
Recently Viewed
You haven't viewed any products yet.
